X

Ultrasonic Testing

Get your UT Training at KTN Belgium.

UT level 1

The UT level 1 course consists of a theoretical part with the basic knowledge of ultrasonic testing and a practical part focused on:

  • measuring wall thicknesses,
  • examining castings and forgings,
  • examining welds of simple geometry (weld in plate or pipe).

The level 1 person may carry out the test and report results under the supervision of a level 2 or 3 person on the basis of an unambiguous work instruction.

Training duration — 10 days + 2 days exam

Price

10 days course: €2570,-
2 days ISO 9712 examination and certification (Hobeon SKO): €913,-
Additional PED card, if required: €49,-


Sign up
Ask for information

When new to NDT, following the 'Introduction NDT' training is recommended but not required to participate in this course.

UT level 2

The UT level 2 course consists of a theoretical part that goes deeper into the theory than the level 1 course and a practical part aimed at:

  • measuring wall thicknesses,
  • examining castings and forgings,
  • examining welds of simple and more complex geometry (weld in an angled joint, nozzle or tee),
  • drafting a work instruction suitable for a level 1 person.

The level 2 person may independently carry out, report and assess the test on the basis of a procedure based on an applicable standard.

Training duration:
In possession of a level 1 certificate: 10 days + 2days exam
In possession of a level 2 WDCD certificate: 5 days + 2 days exam
Direct intake at level 2: 15 days + 2 days exam

Price

15 days course: €3440,-
2 days ISO 9712 examination and certification (Hobeon SKO) €928,-
Additional PED card, if required: €49,-


Sign up
Ask for information

When new to NDT, following the 'Introduction NDT' training is recommended but not required to participate in this course.

UT WDCD level 2

The UT WDCD level 2 course is aimed at measuring wall thicknesses and detecting corrosion (WDCD stands for wall thickness measurement and corrosion detection) and consists of a theoretical part with the necessary ultrasonic knowledge for the WDCD application and a practical part focused on:

  • measuring wall thicknesses on material without a coating
  • measuring wall thicknesses on material with a coating
  • detecting corrosion
  • drafting a work instruction suitable for a level 1 person.

The level 2 WDCD person may independently carry out, report and assess the test on the basis of a procedure based on an applicable standard.

Training duration — 10 days + 2 days exam

Price

10 days course: €2570,-
2 days ISO 9712 examination and certification (Hobeon SKO) €928,-
Additional PED card, if required: €49,-


Sign up
Ask for information

When new to NDT, following the 'Introduction NDT' training is recommended but not required to participate in this course.

Our clients

Get Your NDT Training